How do I open my Eco-Jug?Updated a month ago

How do I open my Eco-Jug?

1. Remove the cap by first prying off the security ring. It helps to use a towel to grip the cap to remove it, or use a jug wrench.

2. Remove the center of the cap with a hole saw, drill, screwdriver, scissors or knife.  If you do not have a hole saw, make a series of small holes with your tool of choice. This allows the center of the cap to be pulled out easily. Be careful not to damage the threads in the cap.

3. After removing the center, tighten the cap onto the jug then screw in the spigot for dispensing. Be careful not to over-tighten. 

4. To allow the product to flow, remove the small cap and puncture or remove the heat seal or pressure seal, then replace the cap. Leaving the cap loose will allow air to enter for the product to flow quicker through the dispensing spout.

5. Prevent leaks by always ensuring that the nozzle is turned to the off position when not in use. Our All-in-One spout also turns 360 degrees to allow you to turn it to an upward position. You can also turn the Eco-Jug to an upright position for safe storage.

You can click HERE to watch our How-To video.